Telergon LA1 22mm · Supplied by TROPAC
Build a complete pushbutton station
Choose an enclosure, fit out each hole with a 22mm pushbutton, selector, E-stop or pilot light, and add the whole station to your cart at once.
Start building
22mm, IP65 operatorsTelergon LA1, built to IEC 60947-5-1
ABS to stainlessPlastic, steel, stainless and IP69K hygienic enclosures
Contact blocks includedThe right blocks are pre-selected for each device
Whole station, one clickChoose a quantity and add every part to your cart
Free freightOn every order through the TROPAC online store
Pick an enclosure and the number of holes, then choose what goes in each hole. The parts list updates as you go.
Build your station
Step 1Enclosure type
Step 2Number of holes
Step 3Fit out each hole
Which contact block?
Every operator needs at least one contact block, which clips onto the back. Pilot lights are the only exception. The builder pre-selects the usual blocks, and you can change them for each hole (up to three per operator).
Start · green pushbutton1 NO contact block (LAA10)
Stop · red pushbutton1 NC contact block (LAA01)
Emergency stop1 NC (LAA01) or 2 NC (LAA02). NC is standard; add a NO for signalling. Confirm against the machine's safety design.
Selectors and key selectors2 position: 1 NO. 3 position: 2 × 1 NO, one each side.
Start-Stop pushbuttonThe dedicated Start-Stop blocks, 1 NO (LAANN) and 1 NC (LAACC)
Pilot lightsNo contact block needed