Home » Telergon — European Switchgear, Locally Supported
Authorised New Zealand Distributor — Telergon

Transfer switches and switchgear, stocked in New Zealand.

Telergon low-voltage switching products — manual transfer, automatic transfer, switch-disconnectors, and changeover switches — available from local stock across New Zealand. Backed by TROPAC's technical support team.
Explore the Range FIND THE RIGHT SWITCH
40A–6300A Switch-disconnector range
Up to 50kA Icw (1s)
63–630A Automatic transfer
60947-3 IEC/EN certified
telergon hero family
Local stock — NZ New Zealand-wide warehousing
Exclusive distributor Genuine product, OEM warranty
PAC support Selection, compliance & project help
IEC/EN 60947-3 Certified switch-disconnector performance
Find your solution

What do you need to switch?

Telergon covers the full range of low-voltage switching requirements. Start with your application and we'll point you to the right series.

Isolation
I need to isolate a load or circuit
For main isolation, service switching, or feeder isolation in switchboards and distribution panels. Rated for switching under load.
S5 or S6 switch-disconnector
View switch-disconnectors →
Manual changeover
I need manual switching between two sources
Generator backup boards, bypass switching, and utility-to-utility changeover. I–0–II operation with break-before-make action.
S5F or CCF/CCP changeover switch
View manual changeover →
Automatic transfer
I need automatic failover to backup power
Hospitals, data centres, and critical facilities where power continuity cannot rely on manual operation. Auto source monitoring and transfer.
C2 ATS automatic transfer switch
View ATS range →
Compact isolation
I need a compact DIN-rail isolator for a sub-board
Space-constrained distribution boards and compact panels. DIN-rail and base-mount load break switches from 16A.
S3 compact switch
View S3 range →
Motor control
I need a rotary cam switch for motor or metering circuits
Voltmeter / ammeter switching, motor direction control, and selector applications. Rotary cam action, 20A–63A.
T series cam switch
View T series →
Not sure?
I'm not sure which series I need
Our Product Application Consultants can specify the right Telergon product for your application — including certification requirements, pole configuration, and Icw ratings.
Talk to a PAC — no obligation
Contact a PAC →
Product range

Five series. Every switching requirement covered.

All series are stocked in New Zealand and available with full technical documentation, wiring diagrams, and PAC support.

S6 · Switch-disconnector
S6 — heavy-duty frame

For high-current isolation where Icw performance is the critical spec — BESS, UPS, data centres and utility substations. Industry-leading fault ratings in a compact footprint, 1250 A to 3150 A. (Lower current? The S5 covers most boards.)

1250A – 3150A 50–60 kA Icw (1s) 3P / 4P IEC/EN 60947-3
Shop S6 range →
S5F · Manual changeover
S5F — widest changeover range

For manual I–0–II changeover on generator backup boards, bypass panels and critical load switching. Heavy-duty, with advanced switched neutral and motorisation-ready, 125 A to 3150 A. The widest changeover range.

125A – 3150A Up to 50 kA Icw Switched neutral Motorisation ready
Shop S5F range →
CCF/CCP · Manual changeover
CCF/CCP — mid-range changeover

For everyday generator-backup changeover on standard commercial distribution boards — a practical, cost-effective choice, 200 A to 1250 A, 8,000 cycles. (Heavier duty or switched neutral? Step up to the S5F.)

200A – 1250A Up to 25 kA Icw 8,000 cycles IEC/EN 60947-3
Shop CCF/CCP range →
C2 ATS · Automatic transfer
C2 ATS — automatic transfer

For automatic failover where power continuity can't rely on manual operation — hospitals, data centres and emergency services. Monitors both supplies and transfers automatically on failure, with LCD programming, RS485 and BMS integration, 63 A to 630 A.

63 A – 630 A LCD · RS485 / BMS Auto retransfer IEC/EN 60947-6-1
Shop C2 ATS range →
Supporting ranges
Application Series Current Key features
Compact isolation S3 16A – 125A DIN-rail and base-mount load break switches for distribution boards Shop S3 range ›
Cam switches T series 20A – 63A Rotary cam switches for motor control, voltmeter/ammeter and selector applications Shop T Series range ›
Why Telergon via TROPAC

European engineering. New Zealand support.

Telergon has manufactured low-voltage switching equipment in Spain for over 70 years. The product is IEC/EN certified, well-proven in European and export markets, and now stocked locally in New Zealand by TROPAC.

The difference with TROPAC isn't just the local stock — it's the technical capability behind it. Our Product Application Consultants can help you select the correct series, confirm pole configuration, check Icw requirements, and advise on compliance for AS/NZS-governed installations.

We don't just supply product — we support its correct application.

Browse the range Talk to a PAC
70+
Years manufacturing low-voltage switchgear
6300A
Maximum current rating — S5 series
60kA
Short-time withstand, S6 (1 second)
5
Series stocked in NZ — all available now
Ready to specify?

Telergon switchgear. In stock. Supported locally.

Browse the full range online, or contact a TROPAC Product Application Consultant for selection advice, compliance guidance, and trade account pricing.

Shop all Telergon Talk to a PAC
Talk to a specialist

Need help specifying?

Send the team your application and a TROPAC Product Application Consultant will come back with the right Telergon product, stock position and account pricing — usually same business day.

  • Selection & cross-reference from your current part numbers
  • Live stock check across NZ
  • Trade-account & project pricing
Enquiry · Telergon
No obligation · usually same business day